30kw surface mount transient voltage suppressor www. microsemi . com scottsdale division plad30kp10 thru plad30kp400ca, e3 plad30kp10 thru 400ca, e3 description appearance these microsemi 30 kw transient voltage suppressors (tvss) are designed for applications requiring protection of voltage- sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per iec61000-4-5 and class levels with various source impedances described herein. this series is available in 10 to 400 volt standoff voltages (v wm ) in both unidirectional and bi-directional with either 5% or 10% tolerances of the breakdown voltage (v br ). microsemi also offers numerous other tvs products to meet higher or lower power demands and special applications. important: for the most current data, consult microsemi?s website: http://www.microsemi.com features applications / benefits ? available in both unidirectional and bidirectional construction (bidirectional with c or ca suffix) ? selections for 10 to 400 volt standoff voltages v wm ? suppresses transients up to 30 kw @ 10/1000 s and 200 kw @ 8/20 s (see figure 1) ? fast response ? optional 100% screening for avionics grade is available by adding ma prefix to part number for added 100% temperature cycle -55 o c to +125 o c (10x) as well as surge (3x) and 24 hours htrb with post test v z & i r (in the operating direction for unidirectional or both directions for bidirectional) ? options for screening in accordance with mil-prf-19500 for jan, jantx, and jantxv are available by adding mq, mx, or mv prefixes respectively to part numbers. ? moisture classification is level 1 with no dry pack required per ipc/jedec j-std-020b ? rohs compliant devices available by adding an ?e3? suffix ? protection from switching transients and induced rf ? protection from esd, and eft per iec 61000-4-2 and iec 61000-4-4 ? secondary lightning protection per iec61000-4-5 with 42 ohms source impedance: class 1,2,3,4: plad30kp10 - plad30kp400a or ca class 5: plad30kp10 - plad30kp400a or ca (short distance) class 5: plad30kp10 - plad30kp220a or ca (long distance) ? secondary lightning protection per iec61000-4-5 with 12 ohms source impedance: class 1,2, 3: plad30kp10 to plad30kp400a or ca class 4: plad30kp10 to plad30kp220a or ca ? secondary lightning protection per iec61000-4-5 with 2 ohms source impedance: class 2: plad30kp10 to plad30kp400a or ca class 3: plad30kp10 to plad30kp220a or ca class 4: plad30kp10 to plad30kp110a or ca maximum ratings mechanical and packaging ? peak pulse power dissipation at 25 o c: 30,000 watts at 10/1000 s (also see figures 1 and 2) ? impulse repetition rate (duty factor): 0.05% ? t clamping (0 volts to v (br) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional ? operating & storage temperature: -65 o c to +150 o c ? thermal resistance: 0.5 o c/w junction to case, or 50 o c/w junction to ambient when mounted on fr4 pc board with recommended mounting pad with 1 oz cu (see last page) ? steady-state power dissipation: 250 watts at t c = 25 o c, or 2.5 watts at t a = 25 o c when mounted on fr4 pc board as described for thermal resistance above ? forward surge: 1500 amps (theoretical) at 8.3 ms half- sine wave for unidirectional devices only ? solder temperatures: 260 o c for 10 s (maximum) ? case: void-free transfer molded thermosetting epoxy body meeting ul94v-0 ? finish: tin-lead or rohs compliant annealed matte-tin plating readily solderable per mil- std-750, method 2026 ? marking: body marked with part number ? polarity: for unidirectional devices, the cathode is on the metal backside (package bottom) ? weight: 1.7-2.0 grams (approximate) ? tape & reel option: standard per eia-296 for axial package (add ?tr? suffix to part number) ? see package dimension on last page microsemi scottsdale division page 1 copyright ? 2007 9-12-2007 rev g 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
30kw surface mount transient voltage suppressor www. microsemi . com scottsdale division plad30kp10 thru plad30kp400ca, e3 plad30kp10 thru 400ca, e3 electrical characteristics microsemi part number (note 2) reverse stand-off voltage v wm (note 1) volts breakdown voltage v (br) v (br) @ i (br) volts ma maximum clamping voltage v c @ i pp volts maximum standby current i d @ v wm a maximum peak pulse current i pp (fig. 3) a maximum temperature coefficient of v (br) v(br ) mv/ oc plad30kp10 plad30kp10a plad30kp11 plad30p11a 10 10 11 11 12.8? 14.6 12.8? 14.0 13.0 ? 15.5 13.0 ? 14.5 150 150 150 150 19.2 18.4 22.4 19.2 15,000 15,000 15,000 15,000 1560 1629 1490 1560 8.0 8.0 8.0 8.0 plad30kp12 plad30kp12a plad30kp13 plad30kp13a 12 12 13 13 13.3 ? 16.3 13.3 ? 14.7 14.4 ? 17.6 14.4 ? 15.9 150 150 150 150 22.8 20.6 24.6 22.4 15,000 15,000 6000 6000 1317 1455 1221 1341 8.0 8.0 8.0 8.0 plad30kp14 plad30kp14a plad30kp15 plad30kp15a 14 14 15 15 15.6 ? 19.1 15.6 ? 17.2 16.7 ? 20.4 16.7 ? 18.5 150 150 5 5 26.6 24.0 28.6 25.8 3000 3000 750 750 1134 1251 1350 1164 10 10 12 12 plad30kp16 plad30kp16a plad30kp17 plad30kp17a 16 16 17 17 17.8 ? 21.8 17.8 ? 19.7 18.9 ? 23.1 18.9 ? 20.9 5 5 5 5 30.0 27.2 31.8 28.8 450 450 150 150 999 1101 942 1041 13 12 15 14 plad30kp18 PLAD30KP18A plad30kp20 plad30kp20a 18 18 20 20 20.0 ? 24.4 20.0 ? 22.1 22.2 ? 27.1 22.2 ? 24.5 5 5 5 5 33.8 30.8 37.6 34.0 120 60 45 45 885 975 798 882 17 16 19 18 plad30kp22 plad30kp22a plad30kp24 plad30kp24a 22 22 24 24 24.4 ? 29.8 24.4 ? 26.9 26.7 ? 32.6 26.7 ? 29.5 5 5 5 5 40.2 36.4 44.0 39.8 10 10 10 10 747 822 681 753 22 20 24 22 plad30kp26 plad30kp26a plad30kp28 plad30kp28a 26 26 28 28 28.9 ? 35.3 28.9 ? 31.9 31.1 ? 38.0 31.1 ? 34.4 5 5 5 5 47.6 43.0 51.6 46.4 10 10 10 10 630 696 582 645 27 24 29 26 plad30kp30 plad30kp30a plad30kp33 plad30kp33a 30 30 33 33 33.3 ? 40.7 33.3 ? 36.8 36.7 ? 44.9 36.7 ? 40.6 5 5 5 5 53.8 48.8 59.0 53.3 10 10 10 10 564 618 510 564 36 30 37 35 plad30kp36 plad30kp36a plad30kp40 plad30kp40a 36 36 40 40 40.0 ? 48.9 40.0 ? 44.2 44.4 ? 54.3 44.4 ? 49.1 5 5 5 5 64.3 58.1 71.4 64.5 10 10 10 10 468 516 420 468 40 38 48 44 plad30kp43 plad30kp43a plad30kp45 plad30kp45a 43 43 45 45 47.8 ? 58.4 47.8 ? 52.8 50.0 ? 61.1 50.0 ? 55.3 5 5 5 5 76.7 69.4 80.3 72.7 10 10 10 10 390 432 372 414 53 50 54 51 plad30kp48 plad30kp48a plad30kp51 plad30kp51a 48 48 51 51 53.3 ? 65.1 53.3 ? 58.9 56.7 ? 69.3 56.7 ? 62.7 5 5 5 5 85.5 77.4 91.1 82.4 10 10 10 10 348 390 330 366 60 54 65 58 plad30kp54 plad30kp54a plad30kp58 plad30kp58a 54 54 58 58 60.0 ? 73.3 60.0 ? 66.3 64.4 ? 78.7 64.4 ? 71.2 5 5 5 5 96.3 87.1 103.0 93.6 10 10 10 10 312 342 294 318 68 64 75 70 plad30kp60 plad30kp60a plad30kp64 plad30kp64a 60 60 64 64 66.7 ? 81.5 66.7 ? 73.7 71.1 ? 86.9 71.1 ? 78.6 5 5 5 5 107.0 96.8 114.0 103.0 10 10 10 10 282 312 264 294 80 72 85 75 microsemi scottsdale division page 2 copyright ? 2007 9-12-2007 rev g 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
30kw surface mount transient voltage suppressor www. microsemi . com scottsdale division plad30kp10 thru plad30kp400ca, e3 plad30kp10 thru 400ca, e3 microsemi part number (note 2) reverse stand- off voltage v wm (note 1) volts breakdown voltage v (br) v (br) @ i (br) volts ma maximum clamping voltage v c @ i pp volts maximum standby current i d @ v wm a maximum peak pulse current i pp (fig. 3) a maximum temperature coefficient of v (br) v(br ) mv/ oc plad30kp70 plad30kp70a plad30kp75 plad30kp75a 70 70 75 75 77.8 ? 95.1 77.8 ? 86.0 83.3 ? 102.0 83.3 ? 92.1 5 5 5 5 125 113 134 121 10 10 10 10 240 264 222 246 93 84 100 90 plad30kp78 plad30kp78a plad30kp85 plad30kp85a 78 78 85 85 86.7 ? 106.0 86.7 ? 95.8 94.4 ? 115.0 94.4 ? 104.0 5 5 5 5 139 126 151 137 10 10 10 10 216 240 198 216 104 95 115 104 plad30kp90 plad30kp90a plad30kp100 plad30kp100a 90 90 100 100 100 ? 122 100 ? 111 111 ? 136 111 ? 123 5 5 5 5 160 146 179 162 10 10 10 10 186 204 168 186 120 109 134 122 plad30kp110 plad30kp110a plad30kp120 plad30kp120a 110 110 120 120 122 ? 149 122 ? 135 133 ? 163 133 ? 147 5 5 5 5 196 177 214 193 10 10 10 10 156 168 140 156 147 132 161 145 plad30kp130 plad30kp130a plad30kp150 plad30kp150a 130 130 150 150 144 ? 176 144 ? 159 167 ? 204 167 ? 185 5 5 5 5 231 209 268 243 10 10 10 10 130 142 112 124 174 157 202 183 plad30kp160 plad30kp160a plad30kp170 plad30kp170a 160 160 170 170 178 ? 218 178 ? 197 189 ? 231 189 ? 209 5 5 5 5 287 259 304 275 10 10 10 10 104 116 98 110 216 195 229 207 plad30kp180 plad30kp180a plad30kp200 plad30kp200a 180 180 200 200 200 ? 244 200 ? 221 222 ? 271 222 ? 245 5 5 5 5 321 291 356 322 10 10 10 10 94 104 84 94 242 219 269 243 plad30kp220 plad30kp220a plad30kp250 plad30kp260a 220 220 250 260 245 ? 299 245 ? 271 278 ? 308 289 ? 320 5 5 5 5 293 356 403 419 10 10 10 10 76 84 74 71 297 269 306 318 plad30kp280a plad30kp300a plad30kp350a plad30kp400a 280 300 350 400 311 ? 345 333 ? 369 389 ? 431 444 - 492 5 5 5 5 451 483 564 644 10 10 10 10 66 62 53 46 344 368 430 490 note 1: transient voltage suppressors are normally selected with reverse ?stand off voltage? v wm which should be equal to or greater than the dc or continuous peak operating voltage level. note 2: for bidirectional construction, indicate a c or ca suffix after the part number. symbols & definitions symbol definition symbol definition v wm working peak (standoff) voltage i pp peak pulse current p pp peak pulse power v c clamping voltage v (br) breakdown voltage i (br) breakdown current for v (br) i d standby current microsemi scottsdale division page 3 copyright ? 2007 9-12-2007 rev g 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
30kw surface mount transient voltage suppressor www. microsemi . com scottsdale division plad30kp10 thru plad30kp400ca, e3 plad30kp10 thru 400ca, e3 graphs p pp ? peak pulse p ower - kw tp ? pulse time - sec figure 2 figure 1 pulse wave form peak pulse power vs. pulse time peak pulse power (p pp ) or contin uo us po we r i n p erc ent of t l lead temperature o c figure 3 derating curve microsemi scottsdale division page 4 copyright ? 2007 9-12-2007 rev g 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
30kw surface mount transient voltage suppressor www. microsemi . com scottsdale division plad30kp10 thru plad30kp400ca, e3 plad30kp10 thru 400ca, e3 package and mounting pad dimensions inches [mm] microsemi scottsdale division page 5 copyright ? 2007 9-12-2007 rev g 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
|